LED floodlight is a point light source that can illuminate evenly in all directions. Its illumination range can be adjusted arbitrarily, and it appears as a regular octahedron in the scene. Floodlight is the most widely used light source in rendering production, and standard floodlight is used to illuminate the entire scene. Multiple floodlights can be applied to the scene to produce better results. Floodlights are the most widely used light sources in renderings. Multiple floodlights can be used to coordinate in the scene to produce better effects. It is to illuminate the object uniformly from a specific point in all directions.
characteristic
Floodlights illuminate objects uniformly in all directions from a specific point.
Install
Materials needed: LED guardrail light clip, transformer with waterproof function, sub-controller, the steps are as follows:
1. Install guardrails, punch holes on the wall, and the spacing is generally within 3 cm according to actual requirements;
2. Do a good job of anti-static measures, such as grounding the workbench, workers wearing corresponding electrostatic clothing, and anti-static measures, because the quality of LED floodlights of different grades is different, and the anti-static ability is different;
3. Pay attention to the tightness of the installation, the tightness is not good, and the diameter affects the service life of the LED floodlight;
4. The LED floodlight wiring should preferably not exceed 25 cm, and the transformer with high power can be lengthened accordingly, otherwise the brightness will be affected.
